US stock - ships from Hayward, CA. Fitment tip: Confirm 7/8in bar mount and 46.5in cable length before order. SKU TA1-S22.
Spec: 7/8in bar thumb throttle with ~46.5in cable - confirm handlebar OD and required cable length.
Thumb-throttle control and cable for compatible ATVs and quads
This 1PZ assembly includes one thumb-throttle control and one accelerator cable for compatible four-stroke ATVs and quads using 7/8-inch (22 mm) handlebars.
Key dimensions
-
Handlebar mounting diameter: 7/8 inch (22 mm)
-
Cable length: approximately 46.5 inches (1180 mm)
-
Exposed metal section: approximately 2.36 inches (60 mm), measured without the outer casing
-
Thumb lever length: approximately 82 mm
-
Package: one thumb-throttle control and one accelerator cable
Common applications
Designed for compatible 50cc, 70cc, 90cc, 110cc, 125cc, 150cc, 200cc and 250cc ATV/quad applications. Common brand references include TaoTao, Buyang, Coolsport, Lifan, Kazuma, SUNL, Redcat, Eagle and other similarly configured machines. Brand or engine size alone does not guarantee fit.
Fitment checklist
| Check |
Required match |
| Handlebar diameter |
7/8 inch (22 mm) |
| Cable length |
Approximately 46.5 inches; must route without tension, binding or sharp bends |
| Cable ends |
Both throttle-control and carburetor ends must match the original assembly |
| Lever clearance |
Confirm space for the housing and approximately 82 mm thumb lever |
| Throttle travel |
Must fully open and return completely in every steering position |
Before ordering
Compare the original control, cable ends, cable length, handlebar diameter and routing with the listed measurements. The former product URL referenced specific Honda ATC/TRX models; those model-specific claims are not used here because the available product data does not confirm them.
Installation and safety
- Use a qualified technician if you are not experienced with throttle-control systems.
- Route the cable away from exhaust heat, steering stops, pinch points and sharp bends.
- Set free play to the vehicle manufacturer's specification.
- With the engine off, turn the bars fully left and right and confirm the throttle returns immediately from every position.
- Do not start or operate the vehicle if the throttle sticks, binds or fails to close fully.
