Universal 7/8 in Motorcycle Turn Signal Switch, 2-Pin Flasher and 12V Horn Kit

Motorcycle lighting and horn control kit

This universal 12V kit combines a left-handlebar control switch, two-pin flasher relay and round horn for compatible motorcycles, dirt bikes and other custom applications. It is intended for 7/8-inch (22 mm) handlebars and requires wiring verification before installation.

Kit functions

• Left and right turn-signal control
• Horn button
• High/low headlight switch
• Two-pin flasher relay for compatible LED turn signals
• 12V round horn

Compatibility

Designed as a universal component for many 12V Honda, Kawasaki, KTM, Suzuki, Yamaha and similar motorcycle or dirt-bike applications using a 7/8-inch handlebar. This is not a model-specific plug-and-play replacement.

Electrical limits

The flasher relay has a maximum rated load of 42W. The combined turn-signal bulb load must remain below that limit. Different LED or incandescent systems may require a compatible relay, resistors, connector changes or rewiring.

Verify before ordering

Compare handlebar diameter, voltage, switch dimensions, connector style, wire colors, pin functions, horn mounting and total lighting load. Not compatible with Harley-Davidson applications or vehicles that require a different control assembly.

Installation notes

Disconnect the battery before wiring. Use the supplied diagram as a reference, but test every wire function with the vehicle service information because wire colors can vary. Protect connections from moisture and confirm lights, horn and beam switching before riding.

Road-use compliance

Universal fit does not mean the kit is approved for every vehicle or public-road jurisdiction. Before road use, confirm required switch markings, indicator color and spacing, flash rate, horn output, weather protection and inspection requirements with the applicable vehicle rules. Installation does not itself make an off-road vehicle street legal.