Performance Ignition Coil For Honda Big Red 200 ATC200ES ATC200E FL250 Odyssey
Voltage: 12 volts
Mounting points (center to center): 57mm (2 1/4")
Spark plug cap resistance: ≈4.91KΩ
Measuring 1PZ primary coil: ≈0.4~0.5Ω
Measuring 1PZ secondary coil: ≈7.51KΩ
The spark plug cap is removable, just twist it off and can be use on any other different degree spark plug caps.
Comes with a Free 120 Degree Cap.
If you have the longer or different cap you may have to re-use your exciting cap.
Just unscrews it if you don't need it.
▶ Use a multimeter:
Primary resistance test, attach both positive multimeter lead and negative multimeter lead on the primary sides(input sides of the ignition coil).
Secondary resistance test, negative lead on the output side(wire without the spark plug cap)
and positive lead on the primary sides (both primary sides should get the same reading on the multimeter).
Now you can twist the spark plug cap(or your old cap) back on(tightly) to do the secondary resistance test again.
It should add another 5-10k ohms to the reading.
▶ This Package Includes:
1 x Ignition Coil With Wire And Spark Plug Cap 120 Degree
1984 Honda Big Red 200 ATC200ES
1983 Honda Big Red 200 ATC200E
1982 Honda Big Red 200 ATC200E
1984 Honda FL250 Odyssey
1983 Honda FL250 Odyssey
1982 Honda FL250 Odyssey
1981 Honda FL250 Odyssey